Page 1 of 1
Old Models
Posted: Thu Aug 15, 2013 9:11 pm
by Halucination
Hi I'm new to the THF server and can't find the spot to change back to "old school" pre luclin models? I found another post on the forum about an option button before logging in, however on my Titanium client that doesn't show up. Any advice would be appreciated!
Re: Old Models
Posted: Thu Aug 15, 2013 10:04 pm
by Sian
When you launch EQ, you click on "I accept" then you have a screen with various things. Click '"options" and "untick" every race you want to have old school model on.
Re: Old Models
Posted: Thu Aug 15, 2013 11:35 pm
by Donrexu
Re: Old Models
Posted: Fri Aug 16, 2013 12:03 am
by Sian
I suck too much at attaching pictures hrhr
Re: Old Models
Posted: Sat Aug 17, 2013 12:21 am
by Halucination
Amazing! Thank you!
Re: Old Models
Posted: Mon Aug 26, 2013 12:46 am
by Mojak
Something else you can do is add these lines to your eqclient.ini:
AllLuclinPcModelsOff=TRUE
LoadVeliousArmorsWithLuclin=TRUE
Here is a copy of that entire section.. Notice all the other options are on still. AllLuclinPcModelsOff=True overrides the other settings. Then when you want to flop back and forth you can just change that 1 line
This is all under the [Defaults] section of eqclient.ini
LoadSocialAnimations=TRUE
AllLuclinPcModelsOff=TRUE
UseLuclinHumanMale=TRUE
UseLuclinHumanFemale=TRUE
UseLuclinBarbarianMale=TRUE
UseLuclinBarbarianFemale=TRUE
UseLuclinEruditeMale=TRUE
UseLuclinEruditeFemale=TRUE
UseLuclinWoodElfMale=TRUE
UseLuclinWoodElfFemale=TRUE
UseLuclinHighElfMale=TRUE
UseLuclinHighElfFemale=TRUE
UseLuclinDarkElfMale=TRUE
UseLuclinDarkElfFemale=TRUE
UseLuclinHalfElfMale=TRUE
UseLuclinHalfElfFemale=TRUE
UseLuclinDwarfMale=TRUE
UseLuclinDwarfFemale=TRUE
UseLuclinTrollMale=TRUE
UseLuclinTrollFemale=TRUE
UseLuclinOgreMale=TRUE
UseLuclinOgreFemale=TRUE
UseLuclinHalflingMale=TRUE
UseLuclinHalflingFemale=TRUE
UseLuclinGnomeMale=TRUE
UseLuclinGnomeFemale=TRUE
UseLuclinIksarMale=TRUE
UseLuclinIksarFemale=TRUE
UseLuclinVahShirMale=TRUE
UseLuclinVahShirFemale=TRUE
UseLuclinElementals=TRUE
LoadVeliousArmorsWithLuclin=TRUE
Something I havent tested is if the luclin models still take up ram, or are loaded with this setting. So they might be being loaded, using ram, just not shown. I'll definitely have to test that
Edit -
You may also have to add these lines as well:
LoadArmor17=TRUE
LoadArmor18=TRUE
LoadArmor19=TRUE
LoadArmor20=TRUE
LoadArmor21=TRUE
LoadArmor22=TRUE
LoadArmor23=TRUE
