Problems with stick

[bebez]

Ok,

So i have been working on this for days and still cant seem to get it. everytime i use stick its worst than autofollow i have 4 chars and three of them are running circles. thats the problem. i am assuming its a FPS issue becuase i see the BG screens around 20fps. yet when i monitor my system im only using less than 20% system resources cpu,ram etc

Heres what i have tried :
1. following the system optimization guide in this forum got everything working still had low fps which im asuming is what is causing this.
2. mq2fps ive tried running the settings every which way i could think of and nothing made it better
3. Wineq2 again ive run the settings everyway i can think of no change


my system:
Windows 7 Home premium
AMD FX-8350 4000mhz
asus motherboard dont remember
physical ram 16gb
virtual mem 32gb
AMD radeon HD 6800
dual monitors

is my system not capable or am i missing something any help would be great.

[lpdfan]

What client are you using?

[bebez]

SoF

[lpdfan]

That is what I thought. Something in the SoF client and mq2 don't stick well together (pun intended).
Several people, including myself, have had the same issue. If you do a thorough check of the forums you will notice a post or two on the subject. What you won't find is a fix. I can tell you it is not your system. It finally annoyed me enough that I changed to UF and the problem was instantly fixed. UF is better, anyway, imho.

Hope that helps

[bebez]

I managed to get the fps up across all 4 screens but still having problems with chars running crazy for no reason could my latency be affecting this ? i run about 300ms

[825th_tomcat]

I think the latency could be an issue, I know when mine gets around 300 my chars like to spaz out.

[lpdfan]

Do your /bcaa commands work? Just curious...

[bebez]

My /bca works but my /bcaa returns a error

[lpdfan]

Another symptom of the discord between SoF and the commonly used compile of MQ2. I'll suggest this one more time and then leave you alone. There is nothing wrong with your system. Refresh rate is not your problem. I went through this exact issue a few months back, even adding 16 gig of additional memory to my system. Nothing worked until I changed my client.
Maybe you know more about MQ2 than I do and can find where the issue is, but I can tell you that if you change your client to UF or SoD, your issues with stick and /bcaa will instantly go away. If you do find a coding conflict and a fix without switching clients, be sure to post it in the forums so that others can use it! Good luck!

[bebez]

I would gladly change clients but have been unable to find UF or SoD for sale online.