Multi-boxing System Configuration & Softwares General FAQ

Third party software discussion goes here.
Stickybuds
Posts: 883

Re: Multi-boxing System Configuration & Softwares General FA

Post#21 » Sun Oct 13, 2013 5:57 am

Nexor wrote:Noticed while preparing my system to 18 box that some cores where set to parking and even with 18 boxes loaded that didn't became active and the system was lagging so decided to research a bit and found out that with a registry tweak you can permanently activate it and that the side effect is that the system will only uses a bit more power.

http://allisterb.blogspot.com/2013/01/the-saga-of-muticore-cpus-core-parking.html

Little prog to check if your cores are parked and option to unpark/park em without editing the registry yourself
http://www.coderbag.com/Programming-C/Disable-CPU-Core-Parking-Utility

Will need to restart the computer after you did changes with the prog.

Hope it will help some ppl out here.


Great find! Thank you for this. Was new news to me and seems to have helped with EQ and some other games as well.

I highly suggest everyone checking to see if your CPU uses this "feature" and to try turning it off.

Regards,
Sticky
Image

User avatar
Denizen
Posts: 882

Re: Multi-boxing System Configuration & Softwares General FA

Post#22 » Tue Oct 22, 2013 5:02 pm

nice program, helpful post. Thanks.
Rafe, 70 sk

Cilraaz
Posts: 14

Re: Multi-boxing System Configuration & Softwares General FA

Post#23 » Wed Jul 02, 2014 9:14 pm

This might be a dumb question, but is GlobalLoad.txt only read on the initial client load or every time the client zones? I had an idea to have two versions of it that I could pull from a batch file (copy the one with all models, load main client, copy the trimmed one, load bot clients), but if the file is re-read during every zone load, that would defeat the purpose.
Xrekt | Ledhia | Galah | Finneg | Xeldaria | Cilraaz
<Honor Before Glory>

User avatar
Nilbus
Posts: 1258

Re: Multi-boxing System Configuration & Softwares General FA

Post#24 » Wed Jul 02, 2014 9:35 pm

Can't say for certain, but pretty sure it's on initial load. Also of note, the THF Patcher will overwrite it if you change it. My patcher batch file runs the patcher in both my folders (full and limited models) then copies a minimal global file back to the limited folder.
Nodyin-Nilbus-Pockit-Tiah-Rakas- Funeral
Likeatruck-Khaltos-Nilbie-Ziknaf-Prathun-Missus
Elidor
Youme-Yumme-Blazingtide-Sublin-Lissanda-Darmok
Djarik-Ikat-Nerys-Ometi-Tarana-Biln

I know way too much random stuff.

Cilraaz
Posts: 14

Re: Multi-boxing System Configuration & Softwares General FA

Post#25 » Wed Jul 02, 2014 9:51 pm

I was thinking about running everything from a single folder, instead. I already have eqclient.ini and eqclient-bots.ini, and I just have WinEQ2 read the appropriate one depending on profile. I could make GlobalLoad.txt.max and GlobalLoad.txt.min, then have my batch file copy "max" into place, start my control session, copy "min" into place, and start my bot sessions. I just wasn't sure if that would go out the window on zone or not.

I guess I have something to test tonight.
Xrekt | Ledhia | Galah | Finneg | Xeldaria | Cilraaz
<Honor Before Glory>

eqwerty
Posts: 21

Re: Multi-boxing System Configuration & Softwares General FA

Post#26 » Tue Oct 07, 2014 5:18 am

Thanks for the guide. Has definitely helped my system performance a ton. I do have one item that I can't seem to get to function

StickFigures=1

I inserted this line, along with all of the other changes to my ini file, but it doesnt seem to have any impact. All of the other changes take effect and help greatly.

Any idea why it wouldn't be working? I've tried inserting it at the top of the ini file and midway...but still doesnt seem to do anything. I'm currently using the SOD client.

User avatar
Nilbus
Posts: 1258

Re: Multi-boxing System Configuration & Softwares General FA

Post#27 » Tue Oct 07, 2014 1:53 pm

Stickfigures only works on UF or above clients.
Nodyin-Nilbus-Pockit-Tiah-Rakas- Funeral
Likeatruck-Khaltos-Nilbie-Ziknaf-Prathun-Missus
Elidor
Youme-Yumme-Blazingtide-Sublin-Lissanda-Darmok
Djarik-Ikat-Nerys-Ometi-Tarana-Biln

I know way too much random stuff.

eqwerty
Posts: 21

Re: Multi-boxing System Configuration & Softwares General FA

Post#28 » Tue Oct 07, 2014 2:15 pm

Thanks sir!!

User avatar
Nilbus
Posts: 1258

Re: Multi-boxing System Configuration & Softwares General FA

Post#29 » Tue Oct 07, 2014 4:46 pm

eqwerty wrote:Thanks sir!!

you're welcome. That was the final straw that made me upgrade to UF. lol.
Nodyin-Nilbus-Pockit-Tiah-Rakas- Funeral
Likeatruck-Khaltos-Nilbie-Ziknaf-Prathun-Missus
Elidor
Youme-Yumme-Blazingtide-Sublin-Lissanda-Darmok
Djarik-Ikat-Nerys-Ometi-Tarana-Biln

I know way too much random stuff.

User avatar
Enrikk
Posts: 389

Re: Everquest Tweaks

Post#30 » Wed Jun 24, 2015 12:47 am

Shanefpt wrote:Prevent All Sounds from Loading

Everquest loads and caches a multitude of files. On slower machines the constant load and release of sound files from memory can cause a lot of drag on your computer. This will prevent EQ from loading any sounds into memory.

Open Notepad++ and create a new blank file, select "Save As" choose your "Slave-EQ" directory and save the file as "NOSOUND.txt" and now this instance of EQ will never again load any sound files upon login. This has a very different effect from simply turning the volume down in the in-game options. This completely prevents the load of all sound files.



Wow, very nice write up! Now, wishing I understood half as much as I'd even like to. I'm not sure I need to do all of the tweaks listed here, but cutting the sound is one I'm very interested in. I don't play with sound at all, so it does nothing to me, and if it speeds things up, even marginally, then I'm all for it!

BUT, it says, drop this file in the directory, but where exactly does this file go? In the "sounds" file, where all the .wav files are, or in the general directory, where all the rest of the stuff is?

Thanks for the assistance!

Enrikk
Lead, Follow, or get out of My Way!

Enrikk of the Few

With MANY voices Also in my head

Return to “Third party software”

Who is online

Users browsing this forum: No registered users and 2 guests

cron